Crusher and its parts
Crushers are available in pre-designed or custom-made types. An important part of the device for selecting the crusher is the strength of the device and the type of alloys used inside it.
هیدروکن
Hydroken or Cone Crusher is one of the types of sand making machines.
The crushing process in this type of cone crusher, which is used as a secondary crusher, is done by closing the distance between the mantle (located on the main shaft) and the concave (which is installed inside the main body of the device, ie the top shell). The gap is opened and closed by an eccentric located at the bottom of the main shaft, which causes the main shaft to rotate. By changing the size of the open span between the mantle and the canopy, the output jack can be resized according to need by the lifting jack. Also, by changing the eccentric size of the device (crankshaft), the passage speed and the size of the output load can be changed. All the main parts of the device that are in direct contact with the input load are made of molybdenum manganese steel which has a very high resistance to abrasion.
This crusher is installed on its own chassis with its hydraulic oil and cooling tank. The electrical panel of the device has the ability to be converted to fully automatic and manual mode, and through this panel, the operation of the device can be controlled. It is necessary to explain that hydrogens are equipped with special oil radiators and are suitable for mines and crushing plants located in very hot and dry weather conditions. Hydroken in sizes: 36-2, 36-4, 36-5, 36-5 / 5, 36-6 / 5, 36-8 are micro-crusher, medium crusher and coarse crusher, respectively.
Hydrocone features:
Hydrocone device components:
Bush Foley
Cobit
Impact Crusher is used as both primary and secondary crushers in mineral processing and crushing lines, this type of crusher to crush mountain or river materials in sizes of about 10 to They are 15 cm.
Hammer crusher (qubit) consists of a rotor that has 2 to 6 rows of hammer blades and rotates at high speed. Is. Crushing is done by rotating the rotor and throwing stones at the walls and anvils. On the inner wall of the crusher, a number of ribbed shields made of anti-wear alloys are installed, which play the role of a barrier, and the incoming load parts are crushed by colliding with them. The speed of the blades is 15 to 50 meters per second. In impact crushers, the output load granulation is easily adjustable by the crusher regulation system.
Also, these crushers are made in two types of hydraulic (with jack) and simple and in one-way, two-way, HS models and in capacities of 80, 100, 120, 180, 240 to 300 tons per hour.
Qubit components
- Armpit (17 × 17)
- Armpit (20 × 20)
- Armpit (17 * 25)
- Armpit 02 (20 × 17)
- Armpit 03 left
- Right armpit 03
- Armpit 05 left
- Armpit 05 right
- Armband 051 qubit 120-180
- Armpit 06 left
- Right armpit 06
- Armpit 10-10 qubits 120
- Armpit 10-11 qubit 120
- Armpit 11-10 qubit 120
- Armpit 11-11 qubit 120
- Armpit 13-11
- Armpit 23-17 left
- Round blind 120
- Cube Duster 120
- Armpit 7-11 left
- Armpit 7-11 straight
- 12 cm sugar head screw and nut 22
- 12 cm sugar head screw and nut 25
- 10 cm single thorn bolt and nut
- 7 cm single thorn bolt
- Rotor cover pin 120-180
- Qubit Hammer 120- Nyhard
- Qubit Hammer 120- Nyhard
- Qubit Hammer 180 – Nyhard
- Qubit Hammer 180 – Nyhard
- Nubhard qubit hammer 240
- Hammer blade 120
- Hammer blade 180
- Anvil screw 3 screws
- Anvil screw 4 screws
- 180 router hood
- Crescent hole round
- Crescent hole near
- Qubit Hammer 120- Nyhard
- Qubit Hammer 180 – Nyhard
- Qubit Hammer 180 – Nyhard
- Nubhard qubit hammer 240
- Hammer blade 120
- Hammer blade 180
- Anvil screw 3 screws
- Anvil screw 4 screws
- 180 router hood
- Rotor cover 180
- Rotor cover 120
- روغن برگردان لبه ضخيم
- Thin edge lapel oil
- Underarm ward 05-06
- Under the crescent around the router
- Under the crescent is a round hole
- The bottom of the crescent is near the hole
- Ceiling 034 left
- Ceiling 034 right
- Ceiling 035 left
- Ceiling 035 right
- Ceiling 036 left
- Ceiling 036 right
- Ceiling 16-11 left
- The ceiling is 16-11
- Ceiling 17-11 left
- The ceiling is 17-11
- Ceiling 55-11 left
- The ceiling is 55-11
- Your anvil is full of two holes
- Your anvil is full of three holes
- Wooden anvil 120
- Wooden anvil 180
- Qubit Ceiling Anvil 180
- Two-hole inscription anvil
- Shock absorber
- Left bumper
- Hammer spring 120
- Hammer spring 180
- Simple dust collector 120
Jaw
سنگ شکن فکی (Jaw Crusher) از نوع سنگ شکن های اولیه می باشد که در معادن مختلف مورد استفاده قرار می گیرند. The size of the jaw crushers is determined by the feed opening at the top of the machine.
. The jaw crusher reduces the dimensions of the stones entering the device by pressing them. The fixed shoulder of the jaw rests on a fixed surface while the moving shoulder strikes the rocks under the force exerted by the toggle. The lower space between the fixed and movable jaws determines the outlet of the jaw or the maximum size of the jaw output load.
The stones introduced into the device remain in the jaw and are crushed until their size fits the lower jaw. In fact, jaw crushers have two fixed and movable combs, which are crushed between these two by proving the movable comb with fixed stones. This device is used for stones with a size higher than 150 mm. The load moves easily in it. The long toggle of the device means that by closing the outlet, the angle between the fixed and movable shoulders does not exceed the standard limit and the load is not easily crushed and thrown up. The body of the device is prepared in one piece to prevent failure due to high pressure and load, and the shoulders of the device are made of molybdenum manganese steel, which have a very high resistance to abrasion. The shoulders are held by the jaws that are screwed to the body and toggle, so the replacement of the jaw shoulders is easy. The bearings used in this device can withstand up to 6 times the load.
Features of jaw crusher
- Fixed shoulder 65-45
- Fixed jaw shoulder 110-90 molybdenum
- Fixed jaw shoulder 55-80 molybdenum
- Fixed and movable jaw shoulder 80 * 100
- Movable jaw shoulder 110-90 molybdenum
- Jaw 55 * 80
- Jaw band
- Jaw spring
بهرینگر
Impact Crusher is used as both primary and secondary crushers in mineral processing and crushing lines, this type of crusher to crush mountain or river materials in sizes of about 10 to They are 15 cm.
Hammer crusher (qubit) consists of a rotor that has 2 to 6 rows of hammer blades and rotates at high speed. Is.
Crushing is done by rotating the rotor and throwing stones at the walls and anvils. On the inner wall of the crusher, a number of ribbed shields made of anti-wear alloys are installed, which play the role of a barrier, and the incoming load parts are crushed by colliding with them. The speed of the blades is 15 to 50 meters per second. In impact crushers, the output load granulation is easily adjustable by the crusher regulation system. Also, these crushers are made in two types of hydraulic (with jack) and simple and in one-way, two-way, HS models and in capacities of 80, 100, 120, 180, 240 to 300 tons per hour.
Rabbit sand maker
Vertical Impact Crusher is with a hammer structure and the crushing operation is done around the vertical axis. The input capacity of the device is 25 and 40 tons per hour and 80-75% of its output is 0-8 mm of sand; The seeds produced will be round and broken. The device has three side doors and by opening them, all the internal parts are available and as a result, it will be easy to replace them.
The characteristics of sand makers are:
The most important parts of rabbit sand making:
Sand wash
A modern device for separating gravel and sand from muddy water Dynamic separation as a result of forced drilling of gravel in the opposite direction of muddy water outlet by creating a cross-sectional reverse flow of water in side tanks equipped with polymer coating on all surfaces subject to wear, such as Scrubbing surface, inner walls, cyclones, etc. sand washing
Equipped with two adjustable vibration motors
Muddy water, free of any pebbles, ready to be sent to Tickner and 90% clean water recycled
Hammer mill
Hammer mill is designed in different sizes and dimensions and is used for crushing all kinds of minerals (gypsum, silica, feldspar, salt, barite, dolomite, building stones, etc.). The output of the device depends on the size required by the customer and can be adjusted from 2 to 25 mm.